Search

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Spring is a 5 Leafto fit: ..

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Leaf Spring has an extra Leaf for strength  6..

This Panel is located at the front of the car between the inner front wheel housing panels. It has the studs to mount the front Leaf Spring (see photo)Fiat Part No: 4189174,4189235to fit:Classic Fiat 500 R all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalySTANDARD FIVE LEAFThis Leaf Spring fits at the front of the car from left to right (wheel to wheel)Has a tendency to lose its spring effect over time and will become flatter, has a bushat either end that attaches to the Stub Axles/Knuckles..

High Quality Productmade by major manufacturer in ItalyThis metal and rubber bush fits into the Front Leaf Spring at each endDimmensons:Inner Diameter [mm] 14Outer Diameter [mm] 27Height 1 [mm] 50Height 2 [mm] 56to fit:Fiat 600 all models (..

Brand New OE QualityMade in ItalyDimmensions:Inner id 12mm,Outer id 27mm,Length of inner sleeve 56mm,Length of outer sleeve 50mmThese Bushes fit at either end of the Front Leaf Springto fit:Fiat 850 all modelsFiat 1100RFiat 1300Fiat 1..

This is the centre bump stop thats located at the top of the leaf spring in the centre (see photo)to fit:Classic Fiat 500 all modelsFiat 126 all modelsAutobiaanchi Bianchina all models..

OE QualityMade in ItalyMetal Clamp with a rubberised finish that clamps around the front Leaf Springto hold it in placeto fit:Classic Fiat 500 all modelsAutobianchi Bianchina all modelsIf you have any questions please contact us for help..

Metal Clamp with a rubberised finish that clamps around the front Leaf Springto hold it in place to fit:Fiat 126 all models If you have any questions please contact us for help..

This Rubber Bush locates into the aluminium support that the Front Leaf Spring is secured toto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)If you have any questions please feel free to ask..

This is for TWO Nyloc Nut & Washer to secure the front leaf springHigh Tensile Zincto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsAutobianchi Bianchina..

Made in ItalyThis is a Rubber Support Block with 2 Studs either end90mm Highto fit:Lancia Fulvia all modelsLancia Flavia all modelsIf you have any questions please contact us for help..

This Aluminium Support holds the front leaf spring to the underneath of the chassisto fit:Classic Fiat 500 D/F/L/R/G all modelsIf you have any questions please feel free to ask..

This Aluminium Support holds the front leaf spring to the underneath of the chassisHeight: 33.8mmto fit:Fiat 126 all models If you have any questions please feel free to ask..

This Panel is located at the front of the car between the inner front wheel housing panels. It has the studs tomount the front Leaf Spring (see photo)to fit:Classic Fiat 500 F,L,R & Giardiniera all modelsIf you have any questions please contact us for help..

High Quality Productmade by major manufacturer in ItalyThis metal and rubber bush fits into the Front Leaf Spring at each end and also into the Front Stub AxleDimmensons:Inner Diameter [mm] 10Outer Diameter [mm] 27Height 1 [mm] 45Height 2 [mm] 51to..

Brand NewMade in ItalyIf you have a corroded or damaged leaf spring support then you can either change the whole X-Member or repair it using this panelto fit:Classic Fiat 500 N/D/F/L/G all models..

Brand NewMade in ItalyIf you have a corroded or damaged leaf spring support then you can either change the whole X-Member or repair it using this panelto fit:Classic Fiat 500 N/D/F/L/G all models..

Brand NewMade in ItalyLancia Part No: 81719237 (no 31 in diagram)to fit:Lancia Fulvia S1, S2 & S3 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis is for ONE Bush (TWO required for both sides) (no 48 in diagram)to fit:Lancia Fulvia all models If you have any questions please contact us for help..