Search

This is for a PAIR (2) of Front Shock Absorber Rubber dust coversto fitFiat Uno all models inc TurboFiat Strada/Ritmo all modelsFiat Regata  all modelsLancia Y10 all modelsPLEASE CONTACT USWITH REGISTRATION OR CHASSIS NUMBER  IF YOU REQUIRE ANY HELP..

This Rubber Bump Stop fits over the front shock absorberto Fit:Classic Fiat Panda all models NOT 4x4 (1986 to 2002)If you have any questions please contact us for help..

Rubber Head Lamp Bulb Cover to insulate and keep the damp out of the Head LampFits at the rear of the Head Lamp and the Bulb connector fits through itto fit:Classic Fiat 500 all modelsFiat 126 all models Fiat 600 all modelsFiat 850 all modelsFiat 850T & 900T/E all model..

This Inner Drive Shaft Boot fits onto the Transmission end of the Drive ShaftDiameter at smaller Shaft End: 25mmDiameter at larger Joint End: 60mmHeight: 85mmto fit:STRADA Abarth 125/130TCCroma 2.0 CHT & IEPlease contact us with the full chassis number of t..

This Inner Drive Shaft Boot is clipped onto the outside of a metal flangeWould normally fit on the Left Hand Side of the vehicleIt has a built in Oil Seal to stop oil leaking and fits onto the Drive Shaft with a incapsulated plastic Bush(No 7 in the diagram)Diameter of base..

This Inner Drive Shaft Boot is clipped onto the outside of a metal flangeWould normally fit on the Left Hand Side of the vehicleIt has a built in Oil Seal to stop oil leaking and fits onto the Drive Shaft with a incapsulated plastic Bush(No 7 in the diagram)Diameter of base..

This Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Plastic Bush to fit onto the ShaftDiameter:  17mm (early small type shaft)to fit:Classic Fiat 500 N/D/G Early models (up to 1966) ..

Quality Rubbermade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Metal Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F/L..

This Boot fits onto the drive shaft on the inside (engine/gearbox side)It has an built in Oil Seal and incapsulated plastic bush to fit onto the drive shaft to fit:Fiat 127, 128, Strada & X19 all modelsClassic Panda Early model..

This Boot fits onto the drive shaft on the inside (engine/gearbox side)It has an built in Oil Seal and incapsulated plastic bush to fit onto the drive shaftDiameter at Base: 27mmto fit:Fiat 850 & 850T all models..

This Inner Drive Shaft Boot fits into a three bolt metal flange and has a clip to hold the other end onto the drive shaftInner diameter of base: 73mmto fit:(FIAT) - NM CINQUECENTO (1992-1998)  all models (FIAT) - LV PANDA 4X2 RL/86(1985-1991) 750cc,903cc,999cc,1100cc ..

This Inner Drive Shaft Boot fits onto a metal flange and has a clip to hold the either end into placeInner diameter of base: 80mmto fit:(FIAT) - NM CINQUECENTO (1992-1998) all models (FIAT) - LV PANDA 4X2 RL/86(1985-1991) 750cc,903cc,999cc,1100cc (FIAT) - 2R PANDA 4X4 R/8..

This Inner Drive Shaft Boot fits into a three bolt flangeIt has a built in Oil Seal to stop oil leaking and fits onto the Drive Shaft with a incapsulated plastic Bush(No 10 in the diagram)Diameter of base: 64mm (smaller type)to fit:PANDA 4X2 RL/86(1985 -1991) 750cc,903cc,999..

Inner diameter of base: 58.8mmFiat Part No: 46308006(No 4 in the diagram)to fit:(FIAT) - 3P NUOVA 500 (2007-....)    1.2 8V (FIAT) - 2Q NUOVA PANDA (2003-2009)   1.1 8V & 1.2 8V (FIAT) - 3U PANDA MY 2009 (2009-2010)   1.1 8V & 1.2 8V (FIAT) - 0X PANDA MY 2011 (2010-....)    a..

This Inner Drive Shaft Boot fits onto a metal flange and has a clip to hold the either end into placeIt comes with an inner bearing/oil thrower which fits onto the shaftThis Kit comes with a new Rubber Boot, Bearing & two Clips (No 3,4,5 &15 in the diagram)Inner diameter of base: 80..

OE QualityMade in Italy Article criteria Length 96 mm Material Polychloroprene (Neoprene) Inner Diameter 1 65 mm Inner Diameter 2 19 mmSupplied with2x Metal Cable Ties1x Pouch Grease(No 4 i..

This Inner Drive Shaft Boot comes complete with metal clip at shaft endand Drive Shaft Bearing assembled and ready to use, all you need is a metal tie at the larger endDiameter Outer 73mmDiameter Inner 23mm(N/S left hand)Fiat Part No: 46307657RRP: £24.89to ..

This rubber Boot fits onto the cable and over the battery terminal to insulate itFits most Battery TypesFor the NEGATIVE - TerminalDimmensions:Length: 57mmWidth: 40mmDepth: 20mmInternal Diameter of Wire Cover: 15mmLength of Wire Cover: 35mmIf you need a..

This rubber Boot fits onto the cable and over the battery terminal to insulate itFits most Battery TypesFor the NEGATIVE - TerminalDimmensions:Length: 57mmWidth: 40mmDepth: 20mmInternal Diameter of Wire Cover: 15mmLength of Wire Cover: 35mmIf you need a..

This rubber Boot fits onto the cable and over the battery terminal to insulate itFits most Battery TypesFor the NEGATIVE - TerminalDimmensions:Length: 57mmWidth: 40mmDepth: 20mmInternal Diameter of Wire Cover: 15mmLength of Wire Cover: 35mmIf you need a..