Search

Black Powder Coated FinishSupplied with GasketsSmall Bore 30mm Twin Chrome Tail Pipesto fit:Classic Fiat 500 Giardiniera all modelsAutobianchi 500 Giardiniera & Furgoncino all modelsIf you have any questions please contact us for help..

These Trims are fitted on the inside edge of the door opening and are shaped to fit snuglyover the Door Seal and protect it from any damage when getting in and out of the carSupplied as a pair, one for each sideFinished in Aluminium and comes complete with new Screws to fit..

These Trims are fitted underneath the Doors onto the Sill PanelsAluminium Sill Trims Kit consists of,2x Aluminium Sill Trimsall x Plastic Trim ClipsTotal Length 1250mmto fit:Classic Fiat 500 Giardiniera all models (up to 1974)If you have any questions ..

Made in ItalyThese Spacers are 20mm thickSupplied with Bolts & Washer to fitto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 early models 594ccIf you have any questions please contact us for help..

Original Quality Vinyl ProductsMade in ItalyThis is a TWO Piece kit of wood & vinyl Trims to fit both doors with holes already cut for window winder handles etc ready to installFinished in Original Quality Mushroom (colour of photos may vary on different screens etc)THIS DO..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into them with a black plastic trim attached as originalThey are made to fit Left Hand Drive model 500's but will fit Right Hand Drive versions with simplemodifications, you would simply need to make new h..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into them with a black plastic trim attached as originalto fit:Classic Fiat 500 N,D & Giardiniera all modelsIf you have any questions please feel free to ask..

This is the Panel that fits on the inside of the doorMade from strong board with holes cut in it already for the Handles etcFinished in good quality vinyl with all holes pre-cutHas a Horizontal lined Pattern as originalSupplied as a matching Pair (2) for both doors(for doors..

This is the Panel that fits on the inside of the doorMade from strong board with holes cut in it already for the Handles etcFinished in good quality vinyl with all holes pre-cutHas a Horizontal lined Pattern as original Supplied as a matching Pair (2) for both doors(for doors with int..

This is a THREE Piece kit of wood & vinyl Trims to fit either side of the rear seats and on the rear boot lidFinished in Original Quality Bordeaux Red Vinylto fit:Classic Fiat 500 Giardiniera all modelsIf you have any questions please contact us for help..

This is a Brake Master Cylinder for a threaded Brake Fluid Reservoir on early model Fiat 500'sto fit:Classic Fiat 500 D & Giardiniera (up to 1964) all modelsIf you have any questions please contact us for help..

This is a Brake Master Cylinder for a threaded Brake Fluid Reservoir on early model Fiat 500'sto fit:Classic Fiat 500 N,D & Giardiniera all early models (with short union fitting to Master Cylinder)If you have any questions please contact us for help..

This is a breathable screw on plastic cap for brake reservoir21mm inner diameter threadto fit:Classic Fiat 500 F,L,R & Giardiniera all modelsFiat 126Fiat 600Fiat 850Fiat 900Fiat 125Autobianchi BianchinaIf you have any questions please email us f..

This is a Brand New Kit of TWO Stub Axles for the Left & RightThey have new top Bushes, Pins, Washers and Bushes and are ready to installThe Kit also comes with two new Hub Nuts(Once fitted they must be greased fully using a grease gun until the grease goes all the way through..

This is a tailored car cover with air vents, elastic skirts and tie loops to secure into placeResistant to Rain, Snow, Birds Mess, Leaves, Dust & Grit Can be hot washed up to 40 deg Made in 78.5% PVC 15% Polyester 6.5% Viscose Supplied in Ferrari Redto fit:Fiat 500 Giardi..

Made in ItalySupplied as ONE Rubber Seal & Chrome BracketThis metal bracket fits the front and rear Bumper to the carFinished in Polished Chrometo fit:Classic Fiat 500 all models (except Giardiniera Rear Bumper)Fiat 126Fiat 600If you have any queries or..

Made in ItalySupplied as ONE Rubber Seal & Galvanised Metal BracketThis metal bracket fits the front and rear Bumper to the carGalvanised Metal Finishto fit:Classic Fiat 500 all models (except Giardiniera Rear Bumper)Fiat 126Fiat 600If you have any quer..

Brand New Quality PartMade in ItalyThis is a STANDARD Camshaftto fit:Classic Fiat 500 Giardiniera (estate) all modelsAutobianchi Bianchina Panoramica (estate)If you have any questions please contact us for help..

This is a 2 piece gasket kit for both sides of the Carburettor Spacer as per diagramNo's 2 & 4 in the diagramto fit:Classic Fiat 500 Giardiniera all modelsIf you need any help please contact us..

Brand NewMade in ItalyFits inside the car between the front seats and in front of the gear lever and disappears under the dashboard to distributor hot air to the ductsup to the windscreen and inside the car.Finished in Blackto fit:Classic Fiat 500 all models..