Search

The 123\FIAT-2-R is designed especially for Fiat500- and Fiat126-engines. With a design similar to the original distributor. No more wear, no more replacement of points and/or condensor EVER again.The advance is now electronically calculated : set it, and forget it! The 123\FIAT-2-R is designe..

This is a Plastic Chrome Badge in three piecesSupplied with Clips to fitto fit:Classic Fiat 500 N/D/F/G..

Large Abarth Alloy Sump PanHolds 3.5 Litres of OilSupplied with Gasket & Boltsto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all air cooled models (up to 1999)If you have any questions please feel free to ask..

Large Abarth Alloy Sump PanHolds FOUR Litres of Oilto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all air cooled models (up to 1999)If you have any questions please feel free to ask..

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Spring is a 5 Leafto fit: ..

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Leaf Spring has an extra Leaf for strength  6..

Brand NewMade in ItalyThis Rod Connects to the Carburettor from the end of the cable (see diagram)Supplied with fitting clips to installLength: 130mmto fit:Classic Fiat 500 F,L,R all modelsFiat 126 All Air Cooled modelsIf you have any questions please c..

Brand NewMade in ItalyThis Modified Aluminium Bush attaches the Accelerator Control Pivot Lever to the top of the fan cowlingto fit:Classic Fiat 500 N, D, F, L, R all modelsFiat 126 All Air Cooled ModelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis white Plastic Bush attaches the Accelerator Control Pivot Lever to the top of the fan cowlingto fit:Classic Fiat 500 N, D, F, L, R all modelsFiat 126 All Air Cooled ModelsIf you have any questions please contact us for help..

Original Style Clip to secure the large Air Intake Hose from the Engine to the Rear GrilleDimmensions: Length 800mm x Width 10mmto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 all air cooled modelsIf you need any help please contact us for help..

Brand NewMade in ItalyThis Aluminium Cover is supplied with new Bolts, Nuts & Washers and fits on top of the fan cowling to remove the air filter canisterto fit:Classic Fiat 500 N/D/F/L/R ALL MODELSFiat 126 all air cooled modelsIf you have any questions please..

This is an Aluminium Crankcase Breather that bolts to the fuel pump outlet& circulates the pressureSupplied with1x Aluminium Crankcase Breather1x Silicone Breather Hose in Red, Blue or Black 500mm1x  Fuel Pump Gasketto fit:Classic Fiat 500 N/D/F/L/R all models ..

Good Quality Aluminum Door Opening HandleHandle to open the door from the inside of the carto fit:Classic Fiat 500 N/D/F/L/R all model (up to 1974)Fiat 850T & 900T/E(This Handle will fit most early model Italian Cars from the sixties up to the ninetiesa..

Good Quality AluminiumONE Bezel for ONE Head LampComes complete with Clips to fit to Head Lampto fit:Classic Fiat 500 N/D/F/L/R/G all models (up to 1974)If you have any queries or questions please feel free to ask..

Brand New PartFinished in Black with Chrome Stalks as originalto fit:Classic Fiat 500 (up to 1966) N/DIf you have any questions please contact us for help..

This is the plastic housing of the dash speedometerFinished in Black as original with coloured warning light bulb coversto fit: Classic Fiat 500 R & GiardinieraIf you have any questions please contact us for help..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into them with a black plastic trim attached as originalThey are made to fit Left Hand Drive model 500's but will fit Right Hand Drive versions with simplemodifications, you would simply need to make new h..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into them with a black plastic trim attached as originalto fit:Classic Fiat 500 N,D & Giardiniera all modelsIf you have any questions please feel free to ask..

These panels fit over the rear inner arch.Finished in a black vinyl material to match the rest of the inner panels.to fit:Classic Fiat 500N/DIf you have any queries or questions please feel free to ask..

Good Quality PartMade in ItalyFront Bonnet/Boot LidFits at the front of the carto fit:Classic Fiat 500 N/D & Giardiniera (up to 1966)If you have any questions please feel free to ask..