Search

This Wheel Bolt has a Flat Head with Domed Chrome Finsh to fit various wheelsDimms:  Bolt Diameter M10mm x 40mm,  Total Length 60mmto fit:Classic Fiat 500 all modelsFiat 126 all early models (up to 1978)If you have any questions please feel free to ask..

Brand NewMade in ItalyThis is a set of FOUR Beautiful Polished Chrome Alloy Wheels Size 4.5 x 12Supplied with4x Red Abarth Center Caps 16x Wheel Bolts & Washersto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 Series 1 (with 190 PCD wheel stud pattern) If you have any questions plea..

Made in ItalyThese Spacers are 20mm thickSupplied with Bolts & Washer to fitto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 early models 594ccIf you have any questions please contact us for help..

This is a metal front number plate plinth to bolt to the bottom of the front bumperThis is for Italian Size Number Plate onlyFor Number Plate Size 270mm x 65mmSupplied with fittings to Front Bumperto fit:Classic Fiat 500 all modelsIf you have any questions..

This is a metal front number plate plinth to bolt to the bottom of the front bumperThis is for Italian Size Number Plate onlyFor Number Plate Size 270mm x 65mmSupplied with2x Bolt & Nut to fit onto front bumper4x Black Screw to install number plate onto plinth..

Made in ItalyThis is for 190 PCD WheelsThis is a kit of FOUR brand new Brake Drum Backing Plates1x O/S Front Plate (RIC-2117)1x N/S Front Plate (RIC-2116)1x O/S Rear Plate (RIC-2119)1x N/S Rear Plate (RIC-2118)to fit:Classic Fiat 500 all models (up to 1974) ..

Good Quality Branded PartsMade in ItalySet of FOUR Brake Shoes to service two wheelsThey are the same on the Front & Rear of the vehicleComplete with Spring AdjustersThese shoes are made oversized with a thicker lining to improve the brake efficiencyand give a ..

Good Quality Branded PartsMade by BREMBO or BOSCHSet of FOUR Brake Shoes to service two wheelsThey are the same on the Front & Rear of the vehicleComplete with Spring AdjustersTo Fit:Fiat 500 D/F/L (up to 1972)126 Early models (up to 1979)(Thes..

This Spring is located between the two Shoes to return them to their neutral positionThere are Two Springs fitted to each Brake DrumLength 100mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc early models only (up to 1978)If you have any questions..

This is a Brand New Kit of TWO Stub Axles for the Left & RightThey have new top Bushes, Pins, Washers and Bushes and are ready to installThe Kit also comes with two new Hub Nuts(Once fitted they must be greased fully using a grease gun until the grease goes all the way through..

This kit includes the following,all x Gaskets (top,middle & bottom)1x Filter1x Needle Valve2x Rubber O'RingTo fit Weber 24-28 IMB 1/100 Carburettorsto fit:Classic Fiat 500R all models (with 594cc Engine)Fiat 126 all early air cooled models 594cc (up to ..

This kit includes the following,all x Gaskets (top,middle & bottom)1x Filter1x Needle Valve2x Rubber O'RingTo fit Weber28 IMB 3/100 - 3/250Carburettorsto fit:Classic Fiat 500R all models (with 594cc Engine)Fiat 126 all early air cooled models 594cc (up ..

Brand New Choke & StarterPull Lever AssemblyMade in Italy as originalto fit:Classic Fiat 500 all models F/L/R/G (from 1968 on)Fiat 126 (all early Pull Lever Start Versions)If you have any questions please contact us for help..

This three piece kit is for the metal strap that holds the dynamo in place to secure it to the engineto fit:Classic Fiat 500 N,D,F,L,R all models (except Giardiniera)Fiat 126 early models (up to 1977)If you have any questions please contact us for help..

This is a kit of 8 Pieces to repair the Floor Pan Strengthening Barsto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Front Windscreen & Rear Screen Rubber Seal for Chrome InsertChrome Insert & Joining Clips also supplied These Seals are for the early Fiat 126 from the early 1970's up to 1978 (Italian Made) to fit:Fiat 126 early (pre 1978) If you have any quest..

Made in ItalySave yourself time by installing these complete brake kits already assembled for youThis is a kit of 2 Assembled Front Wheel Backing Plate Kits for both front wheels including2x  Front Wheel Cylinders4x Front Brake Shoes4x Return Springs2x  Backing Plates ..

Quality Branded Italian Parts made in ItalyFront Brake Drum to fitFor Wide Spaced Wheel Bolts (190 PCD) Total Br. Drum Height [mm] 67 mm to shaft diameter [mm] 43 mm for shaft diameter from [mm] 35 mm No. of holes 2 1 ..

Pair of Front Camber Adjustment Brackets30mm AdjustmentThese Brackets are designed to raise the front Suspension Arms which will give 30mm more Camber at the front of the car They are a simple 2 Bolt fit, no welding or other modification required They are especially recomme..

Front Panel 'Fiat' Badge in Black with White PrintHas TWO pins at the rear to locate into two holesSupplied with metal clips to fitto fit:Classic Fiat 500 R all modelsFiat 126 Early modelsIf you have any questions please cntact us for helpIf you have any q..