Cables and Clips

Brand NewCommon Failure as the end of the Cable can be prone to breakingRight Hand Drive Cars OnlyFiat Part No: 7587592to fit:Classic Fiat Panda 750cc & 1000cc inc 4x4 (1986 to 1995)If you have any questions please contact us for help..

OE Quality partsThis Cable is for the Right Hand Drive Vehicles with a metal oval flange that bolts onto the pedal boxFor RIGHT HAND DRIVE vehicles onlyto fit:Classic Fiat Panda all models (from 1989 on)If you have any questions please contact us for help..

This metal Clip is fitted into the Brake Drum to secure the Brake ShoesFiat Part No: 5952868 (no 6 in the diagram)to fit: (FIAT) - MD 126 BIS (1987-1999)   (FIAT) - MR UNO R/89 900-1.0-1.1 (1989-1995)   (FIAT) - MS UNO R/89 1.1-1370-1.5 (1989-1995)  ..

These Metal Clips are fitted into the Brake Drum to secure the Brake ShoesThe Kit is supplied with4x Brake Clip4x Brake Securing PinFiat Part No: 5952868 (no 6 in the diagram)to fit:(FIAT) - MD 126 BIS (1987-1999) (FIAT) - MR UNO R..

This kit consists of15 metres x Bowden Cable4x Cable NippleThis kit can be used fix bonnet cables,accelerator cables,choke cables etc..

This is a white plastic joint with female thread at one end and ball joint fitting to secure to a linkageLength 30mmto fit:Fiat 124Fiat 125Fiat 126Fiat 127 & 128Fiat 131 & 132Fiat 850Classic Fiat PandaFiat UnoIf you have any questions ..

OE Quality PartsMade in ItalyTo Fit:Classic Fiat 124Fiat 127,128,FiorinoAutobianchi A112Classic Fiat Panda & Seat Marbella..

OE Quality PartsMade in ItalyThis Cable has two connections to operate a dash light on/offTo Fit:Fiat 127Classic Fiat Panda 4x4..

This is for a Steel Clevis Pin, Washer & Split Pin to secure cables in positionas a guide these are some of the applications and sizes for classis carsStarter Cable 4mmClutch/Choke/Starter Cable 5mmClutch Cable 6mmHandbrake Cable 8mm..

This Cable is for the Right Hand Drive Vehicles with the round clip-on fitting to the pedal boxto fit:Classic Fiat Panda all models (from 1985 to 91)If you have any questions please contact us for help..

Brand New Length 1 600 mm Length 2 440 mmto fit: PANDA (141_) 650 More information 01.1982-07.2004 8237 22 30 652 Hatchback PANDA (141_) 800 More information ..

This is an Inner & Outer Cable to open the bonnetSupplied with a Cable Nipple to secure at the bonnet endThis Cable is for cars with the opening handle on the inside left hand side of the carLength 1/ Length 2 [mm] 1350/1500to fit:Classic Fiat Panda all models (from..

Original QualityMade in Italyto fit:Fiat Panda all models (NOT 4x4)(from 1985 to 1995)If you need help please contact us with the chassis or registration number ..

Original QualityMade in ItalyLength 2385 mmto fit:Fiat Panda various models(from 1991 on)If you need help please contact us with the chassis or registration number..

OE QualityMade in Italy Article criteria Fitting Position Rear Length 1 2,675 mm Length 2 1,010 mm Length 3 1,010 mmto fit:Y10 1.0 4WD More information12.1986-10.1995162163750999Hatc..

This is an Inner Wire Cable to repair the bonnet cable.  Supplied with a Cable Nipple to secure at the bonnet endto fit:Classic Fiat Panda all models (from 1981 to 2002)If you have any questions please contact us for help..

P clips are used extensively in many industries for securing pipes, hoses and cables. The snug fitting EPDM liner enables the clips to clamp the pipes, hoses and cables firmly without any possibilty of chafing or damage to the surface of the component being clamped, and of course they can be supplie..

OE Quality PartsMade in ItalyFor Right Hand Drive vehiclesTo Fit:Classic Fiat Panda (1985 to 2002)NOT FOR SELECTA AUTOMATICPlease contact us with the full chassis number of the car if you are unsure..