Brake Parts and Components

Brand NewThis is a PAIR (2) of left and right adjusting cams to adjust the aluminium brake shoes in the back platesThere are twop choices with either 8mm or 10mm thread/nutto fit:Fiat 600 series 1Fiat 1100 early models..

Course Thread Banjo Bolt Supplied with TWO Copper Washers to fit many different Italian cars..

Cleans brake & clutch parts without the need for dismantlingKey FeaturesCleans brake & clutch parts without the need for dismantling Fast evaporating with no residue Removes brake fluid, grease, oil and dust Helps maximise braking efficiency Helps prevent dust escaping into the wo..

Product InformationSingle handed brake bleeding kitKey FeaturesSingle handed brake bleeding kit Tubing and container included Time saving..

This is a Bolt thats used to blank an outlet on a hydraulic cylinderSupplied as a PAIR (2)Length 220mmM10 x 1.25mm..

This Clip is used on many different models of Italian Cars from the early 70's to the 90'sFinished in Yellow Zinc..

This is a nut to secure the brake hoseSize: M16 x 1.5..

OE Quality PartsMade in Italyto fit:Fiat Punto MK1 1.2 8V & 16V, 1.4 GT, 1.6, 1.7D (from 1993 to 99)Fiat Classic Panda 1.1 & 4x4 (from 1995 to 03)Fiat Seicento 0.9 & 1.1 (1998 to 10)Fiat Barchetta all (1995 to 05)Fiat Coupe 1.8 16V, 2.0 20V & Turbo (1996 to 00)..

OE QualityMade in ItalyTo Fit:Fiat 600T,Fiat 600 Multipla,Fiat 850T,Fiat 900T..

This spring is attached to the brake pedal to give it tension and return it to its starting position once depressedto fit:Classic Fiat 500 N,D,F,L,R all models (up to 1974)Fiat 600 all modelsFiat 850 all modelsFiat 125 all  modelsIf you have any questions please fee..

This is a breathable screw on plastic cap for brake reservoir21mm inner diameter threadto fit:Classic Fiat 500 F,L,R & Giardiniera all modelsFiat 126Fiat 600Fiat 850Fiat 900Fiat 125Autobianchi BianchinaIf you have any questions please email us f..

This is a set of FOUR Brake ShoesTo fit Front or RearThese Shoes are not the self adjusting type as on some later modelsThese Shoes have a long top 'Lug' as opposed to another type that has a short top 'Lug' (see photo 3 to explain, these are the type on the left hand side)..

This is a set of FOUR Brake ShoesTo fit Front or RearThese Shoes are not the self adjusting type as on some later modelsThese Shoes have a short top 'Lug' as opposed to another type that has a long top 'Lug'  (see photo 3 to explain, these are the type on the right hand side) ..

Common on a lot of early FiatsSize: M10 x 1.25Fits:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any questions please contact us for help..

This kit consists of1x Brass THREE Way Joint 1.25mm Thread1x M14 – M10 Banjo Bolt 1.25mm Thread2x Copper Washer..

Fits many early model Fiat's, Lancia's and Alfa Romeos with course thread brake unions1.25mm Course Pitch Thread to suit M10 Brake Unionsto fit:Classic Fiat 500 F,L,R,G all models (from 1968 on)Fiat 126Fiat 127Fiat 128PLUS MANY MORE MODELSIf you ha..

Brand NewThis is a coil of 7.5 metres of Copper Coil with 4.76mm diameterto fit the brake unions..

Anti-seize assembly compound, with extreme temperature tolerance (-40C to +1150C)Key FeaturesAnti-seize assembly compound, with extreme temperature tolerance (-40C to +1150C) Forms a dense protective coating over metal parts - will not wash or burn off Helps prevent brake disc squeal ..

Protects metal parts against heat, seizure, corrosion, water and acidKey FeaturesProtects metal parts against heat, seizure, corrosion, water and acid Non-melt and non-drip formula High performance lubricating grease and anti-seize compound Lead free Effective temperature range -3..

Product InformationDOT 4 brake fluid is a high quality brake fluid recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a glycol based DOT 3 or DOT 4 fluid is specified. With a higher boiling point than DOT 3 fluid, this fluid i..