Axles, Shafts, Joints and Couplings

These high pressure grease guns have an improved plunger for complete grease removal for both cartridge and bulk grease loadingKey FeaturesHeavy duty manual grease gun 3-way filling operation, standard 400g cartridge, suction or bulk fill up to 500cc 2x Standard 400g Lithium Multi-pur..

Brand New Length [mm] 426 mm Weight [g] 1200 g Fitting Position Front Axle left and right Diameter 1 [mm] 16 mm Diameter 2 [mm] 25 mm Number of Teeth 22to fit:Fiat 600 DC..

Brand NewThis is a new improved high quality Drive Shaft KitThis kit consists of,2x Drive Shafts (Fine 20 Spline Shafts)2x Drive Shaft Flange2x Drive Shaft Aluminium Coupling2x Shaft End Springs2x Clips2x Inner Boots2x Outer Boots(Fine 20 Spline Shafts) ..

Made in Italy Height 25 mm Width 38.7 mm Weight 89 g Internal Thread 1 M 24X1,5 mmto fit:Fiat Barchetta all modelsFiat Coupe all modelsFiat Punto GT all modelsNew 500 Abarth..

OE QualityMade in ItalyOuter diameter [mm]57,15 mmHeight [mm]10 mmFitting PositionFront AxleInner diameter [mm]35 mmto fit:Fiat 600 MultiplaFiat 600TFiat 850TFiat 900T/E all models..

Connects the Gear Linkage assembly to the Gearbox in order to select GearsThis part has a rubber joint in the middle that after a while will perish and make itdifficult to select gearsto fit:Fiat 600If you have any queries or questions please feel free to ask..

A professional grease for the professional user, a high quality product manufactured in the UKKey FeaturesA heavy duty premium quality highly versatile multi-purpose lithium grease Operating temperature range -20 C to + 140 C High degree of corrosion protection Excellent extreme pre..

To Fit a multtude of Fiat, Alfa Romeo & Lancia models old and newFiat Part No: ..

This Boot fits onto the drive shaft on the inside (engine/gearbox side)It has an built in Oil Seal and incapsulated plastic bush to fit onto the drive shaftto fit:Fiat 600 all models..

Front Wheel Hub Nut(M18 x 1.5) For O/S Right of Vehicle (Left Hand Thread) Fiat Part No: 14044871to fit:Fiat DinoFiat 124 & 125Fiat 131 & 132Fiat 1100R, 1200, 1300 & 1500 CabFiat 600T, 850T & 900T/E If you have any questions please c..

Front Wheel Hub Nut(M18 x 1.5) For O/S Right of Vehicle (Left Hand Thread) Fiat Part No: 14044171to fit:Fiat DinoFiat 124 & 125Fiat 131 & 132Fiat 1100R, 1200, 1300 & 1500 CabFiat 600T, 850T & 900T/E If you h..

Brand NewFine Multipline Shaftto fit:Fiat 600D all models..

The benefit of these tie straps over plastic ones is that they are made from non corrosive stainless steel They are mainly designed to be fitted to CV Boots which are under constant threat from water, heat and road grime..

Made in ItalyComplete Kit For Both SidesThis is an uprated CV Style Joint that would replace the existing Aluminium Coupling which is a common weak point of the drive trainPerfect for standard cars but also cars with tuned engines adding more stress to the drive shaft & joints ..

This is a complete kit of Trunnions to repair/overhaul the front Stub AxlesStandard Sizeto fit:Fiat 850T & 900T/EFiat MultiplaFiat 1100If you have any questions please feel free to ask..

This is a complete kit of Trunnions to repair/overhaul the front Stub Axles(+5) OverSizeto fit:Fiat 850T & 900T/EFiat 600 MultiplaFiat 1100If you have any questions please feel free to ask..

This is a complete kit of Trunnions to repair/overhaul the front Stub Axles(+10) OverSizeto fit:Fiat 850T & 900T/EFiat 600 MultiplaFiat 1100If you have any questions please feel free to ask..