Starter Motor, Alternator & related parts

Made in ItalyThis is a Dynamo Brush to fit inside the Dynamo when wornThis is for a PAIR (2) of Brushesto fit:Classic Fiat 500 F/L/R 499cc & 594cc all models (from 1966 on)Fiat 126 594cc all models (up to 1977)FIAT 600 ALL MODELSIf you have any questio..

This is a kit of TWO (2) Bearings to fit either end of the Dynamoto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 early models with 594cc engineIf you have any questions please contact us for help..

This Hub has three studs for the Fan Pulley to attach onto and is attached onto the Dynamo to drive the Cooling FanSupplied with new Nuts and Locking Keyto fit:Classic Fiat 500 all modelsFiat 126 594cc all models (with Dynamo)If you have any questions please feel free to ask..

This rubber Boot fits onto the cable and over the Dynamo terminal to protect and insulate itThere are two options to choose SMALL or LARGEto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 594cc early models with Dynamo (up to 1976)Dimmensions:Total Length: 45m..

This is a semi circle shaped metal key that fits into the shaft of an Dynamo to lock the Hub3mm Widthto fit:Classic Fiat 500 all models with DynamoFiat 126 (594cc with Dynamo)If you have any questions please contact us for help..

Insulated Black Earth StrapLength: 500mmTakes an 8mm fittingto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 early models (up to 1978)If you have any questions please contact us for help..

Non Adjustable Electronic Type Voltage RegulatorThis part fits to the rear Bulkhead of vehicle and connects to the DynamoFitted to an Aluminium plate for coolingto fit:Classic Fiat 500 all models (with Dynamo)Fiat 126 all early models up to 1978 (with Dynamo)Fi..

Flywheel Ring GearDiameter:INTERNAL: 240mm EXTERNAL: 264mm DEPTH: 12 mm TEETH: 123to fit:Classic Fiat 500 R (600cc) all modelsFiat 126 (600cc & 650cc) all modelsIf you have any questions please contact us for help..

This is a two piece Generator Pulley to fit either a Dynamo or AlternatorSupplied with spacing Shimsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc & 650cc models (up to 1999)If you have any questions or queries please feel free to ask..

Stainless SteelKey FeaturesStainless Steel 12V 20A Max Fits hold size 19mm Sold as a singleCan be used as an engine starting switchinstead of a pull lever onClassic Fiat 500,600,126..

This Hub is fitted at the Rear of the Dynamo Shaft for the Fan to attach onto and is located in the Rear of the Fan CowlingConical Shapeto fit:Classic Fiat 500 all modelsFiat 126 594cc all models (with Dynamo)If you have any questions please feel free to ask..

Fully Factory re-built Alternator with all new parts fittedFully Guaranteed and supplied with a 12 month warranty(This Alternator has a Voltage Regulator built in)to fit:Fiat 126 704cc Bis models (up to 1993)IMPORTANT:  As these are reconditioned units we would nee..

Fully Factory re-built in ItalyFitted with new parts where requiredFully Guaranteed and supplied with a 12 month warrantySupplied without a Pulley & Key (sold separately if required)to fit:Classic Fiat 500 F/L/R all models (up to 1974)Fiat 126 594cc early models (up to ..

Reconditioned Original Choke & StarterPull Lever Assemblyto fit:Classic Fiat 500 all models D/F/L/R/GFiat 126 (all early Pull Lever Start Versions)If you have any questions please contact us for help..

Fully Factory re-built Starter Motor with all new parts fittedFully Guaranteed and supplied with a 12 month warrantyto fit:Classic Fiat 500 N/D/F/L/R(with pull start lever & fitted to the side of the gearbox housing)Fiat 126 all air cooled models(with pull start lever..

This plastic clip is located on the underside of the car where the Starter Cable is routed to the starter motor, and holds the outer cable in place for ease of operationto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early modelsIf you have any questions please..

Starter Motor BendixFits into the Starter Motor this part engages with the Flywheel to turn the engineto fit:Classic Fiat 500 R modelFiat 126 early model (up to 1977) with lever pull startIf you have any questions please contact us for help..

Starter Motor Bendix Fits into the Starter Motor this part engages with the Flywheel to turn the engine to fit:Classic Fiat 500 all models (with Key Start Starter Motor)Fiat 126 all model (up to 1999) with Key Start Starter Motor If you have any questio..

This is an M8 bolt with a flat edge to secureTotal Length 39mmThread 15mmto fit:Classic Fiat 500R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis is for TWO Starter Motor Brushesto fit:Fiat 500 Topolino all modelsClassic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/E all modelsFiat 1100If you have any questions p..