%20[LIMITED%20to%20500px]-640x560w.jpg "Fiat 238,241,242")
Model: all models 499cc & 594cc
Fully Factory re-built in ItalyFitted with new parts where requiredFully Guaranteed and supplied with a 12 month warrantySupplied without a Pulley & Key (sold separately if required)to fit:Classic Fiat 500 F/L/R all models (up to 1974)Fiat 126 594cc early models (up to ..
£239.95
Ex Tax:£239.95
Model: Classic Fiat 500 D/F/L
Fully Factory Reconditioned Non-Syncro GearboxThe Gearbox's have been rebuilt to a high standard by specialist's and fitted with the following,New Bearings Bearings
New Gaskets & Seals
New Drive Shaft Boots
New Drive Shafts
New Drive Shaft Flange's
Gears Inspected and chang..
£1,395.95
Ex Tax:£1,395.95
Model: Classic Fiat 500 594cc & 650cc models, Fiat 126 air cooled
Fully Factory re-built Starter Motor with all new parts fittedFully Guaranteed and supplied with a 12 month warrantyto fit:Classic Fiat 500 N/D/F/L/R(with pull start lever & fitted to the side of the gearbox housing)Fiat 126 all air cooled models(with pull start lever..
£219.95
Ex Tax:£219.95
Model: Classic Fiat 126 Air Cooled
Fully Factory Reconditioned Syncro GearboxThe Gearbox's have been rebuilt to a high standard by specialist's and fitted with the following,New Shaft and Diff Bearings
New Synchro Rings
New Gaskets & Seals
New Drive Shaft Boots
New Drive Shafts
New Drive Shaft Flange's
Gear..
£1,595.00
Ex Tax:£1,595.00
Model: Classic Fiat 500R 594cc & 126 early 594cc
This is a complete Cylinder Head reconditioned by professionals to a very high standardWork completed includes,Skimming
All threads Checked and repaired if necessary
Vapour Blasting
New Valve Guides, Seals, Original Valves & Springs fitted
Re-Cutting Inlet Valve Seats
L..
£469.95
Ex Tax:£469.95
Model: Classic Fiat 500, 126 with 650cc engine fitted
This is a complete Cylinder Head reconditioned by professionals to a very high standardThis head Includes Larger Uprated Inlet Valve (34mm) & Exhaust Valves (30mm)Work completed includes,Vapour Blasting
Skimming
All threads Checked and repaired if necessary
New Valve Gu..
£399.95
Ex Tax:£399.95
Model: Classic Fiat 500,126,600,850,900,1100,Topolino all models
Brand NewMade in ItalyThis is for TWO Starter Motor Brushesto fit:Fiat 500 Topolino all modelsClassic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/E all modelsFiat 1100If you have any questions p..
£5.95
Ex Tax:£5.95
Model: Classic Fiat 500 & 126 (Pull-Start)
This Rubber Boot is located on the Starter Motor Lever to protect it from dirt and dampto fit:Classic Fiat 500 all modelsFiat 126 all pull-start modelsIf you have any questions please contact us for help..
£1.95
Ex Tax:£1.95
Model: Classic Fiat 500 R & 126 all models
This thin metal support plate is fitted between the Starter Motor and the Gearbox Bell Housingto fit:Classic Fiat 500 R all modelsFiat 126 all modelsIf you have any questions please contact us for help..
£7.95
Ex Tax:£7.95
Model: Classic Fiat 500D/G,600,850,1100,1200
Brand NewMade in ItalyThis is the support thats fitted at one end of the starter motor and houses the brushesto fit:Classic Fiat 500CClassic Fiat 500 D & GiardinieraFiat 600DFiat 1100D,103,E,H,GFiat 850Fiat 1200 ..
£44.95
Ex Tax:£44.95
Out Of Stock
Model: Classic Fiat 500 N/D/F/L/R & 126 594cc all models
This is a kit of parts to convert from using a Dynamo Generator to a more stable Alternator, whichwill be more reliable and give you a better output to install a charging device or radio etcThe conversion is not too difficult but its recommended that the wiring work is undertaken by a q..
£599.95
Ex Tax:£599.95
Out Of Stock
Model: Classic Fiat 500 N/D/F/L/R all models
Brand NewThis Flange has a new Bearing fittedto fit:Classic Fiat 500 N/D/F/L/R all modelsIf you need help please email us..
£46.32
Ex Tax:£46.32
Out Of Stock
Model: Fiat 500 & 126 all models (with Voltage Regulator)
Brand NewFully Guaranteed and supplied with a 12 month warrantyMade in Polandto fit:Classic Fiat 500 all models (with 650cc engine fitted)Fiat 126 650cc models (up to 1999)IMPORTANT: These units are Brand New units BUT we would still require your old Alterna..
£479.95
Ex Tax:£479.95
Out Of Stock
Model: Fiat 126 all models
This is a Brand New Kit of TWO Stub Axles for the Left & RightThey have new top Bushes, Pins, Washers and Bushes and are ready to install This kit is also modified with bearings top and bottom for a smoother action Supplied with two new Hub Nuts (Once..
£295.00
Ex Tax:£295.00
Out Of Stock
Model: Classic Fiat 500 (650cc), 126 all air cooled
Reconditioned Original Front Oil Pump/Timing Chain CoverIncluding Brand New Oil Pump,Oil Seal & GasketFitted at the Front of the Engine (see diagram)to fit:Classic Fiat 500 (650cc)Fiat 126 (Air Cooled ONLY)If you have any questions please contact us for hel..
£219.95
Ex Tax:£219.95
Out Of Stock
Model: 650cc all models (without Voltage Regulator)
Fully Factory re-built Alternator with all new parts fittedFully Guaranteed and supplied with a 12 month warranty (This Alternator has no Voltage Regulator)Some of the early model Fiat 126 engines had a separate Alternator and Voltage Regulator to fit:Cla..
£168.37
Ex Tax:£168.37
Out Of Stock
Model: Classic Fiat 500 & 126 with 650cc Engine
Fully Factory re-built Alternator with all new parts fittedFully Guaranteed and supplied with a 12 month warrantyThis Alternator has a new Voltage Regulator built in and comes with a new Pulley Hub, Nuts & Woodruff Keys ready to installto fit:Classic Fiat 500 all model..
£249.95
Ex Tax:£249.95
Out Of Stock
Model: Fiat 126 BIS all Water Cooled models
This is a Crankshaft thats been professionally Ground/Polished and cleaned and is ready to installThis kit consists of 1x Crankshaft1x Front Main Bearing1x Rear Main Bearing1x Set Bearing Shellsto fit:Fiat 126 BIS all Water Cooled modelsTHIS IS A RECONDITIONED PART SO WE..
£449.95
Ex Tax:£449.95
Out Of Stock
Model: Classic Fiat 500, 126 & Panda 30
This is a Fully Reconditioned Cylinder Head and is suppied with the following5x Uprated Aluminium Spring Loaded Push Rod Tubes1x Head Gasket Set for Fiat Panda 30This Twin Port Head is used to fit onto Fiat 126 650cc Engine for 25% increased performanceWe also have Manifolds in..
£595.95
Ex Tax:£595.95
Out Of Stock
Model: Classic Fiat 500 (with 650cc engine fitted) 126 650cc all models
This is an inspected Vapour Blasted useable factory flywheel to fit:Classic Fiat 500 (with 650cc engine fitted)Fiat 126 650cc all modelsIf you have any questions please contact us for help..
£99.95
Ex Tax:£99.95