Gaskets, Seals,Grommets and Rubber Parts

This is a rubber plug or a 19mm hole on the dashboardto fit:Classic Fiat 500Fiat 126Fiat 600Fiat 850Fiat 124Autobianchi Bianchina..

OE QualityMade in ItalyRubber Seal to fit onto DipstickDimmensions:Length 47mmFits many different models including:Classic Fiat 500 R 594cc126 all models600,850,900,133,124,125,127,128,131,132Strada/Ritmo, RegataPanda, Uno all modelsCinquece..

This rubber pad or grommet fits around the Door aperture on the top and bottomThere are TWO per Doorto fit:Classic Fiat 500 all models..

This is for ONE (1) metre of Rubber Channel thats fitted around the door opening glassThis is usually fitted inside the aperture of the door around the door glass, and stays in place due to the flexible spine that into the gapSize 14.5mm x 13mmto fit:Classic Fiat 500 all models ..

This is a 20 metre Roll Rubber & Metal ChannelAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside it13mmx14.5mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 a..

This Rubber & Metal Channel is measured for ONE Door to fit along the top and down the rear of the door glass and into the doorAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside itFiat..

Fitted between the Rocker Cover and the Air Filter Housing this rubber hose is very important tolet the engine breatheto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have queries or questions please feel free to..

These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all models (NOT Giardiniera)If you have any questions or queries please feel free to ask..

This is for ONE (1) Rubber Pad to fit around the aperture of the rear engine lidNumber 13 in the diagramto fit:Fiat 126 Air cooled all models..

OE Quality PartsMade in ItalyThis pad supports the top of the engine mount spring (see diagram)to fit:Classic Fiat 500 R all modelsFiat 126 air cooled all models..

This kit consists of all the parts to install an exhaust manifold to cylinder head and exhaust1x Exhaust Gasket (RIC 394)1x Exhaust Manifold Gasket Rear (RIC 395)2x Brass Nut & Spring Washer (RIC 939)2x Manifold to Head Bolts & Spring Washers (RIC 1898)to fit:Classic Fia..

Made in ItalyThis is a Rubber Plug to fill the holes on the floor either side of the tunnelThere are usually 6 holes (3 per side)to fill hole 20mm Diameterto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

This Rubber Channel is measured for ONE DoorThis Channel fits where the door glass meets the Quarter Light Frame upright (see diagram in related photos)Narrow TypeFiat Part No: 4070123 (as per diagram in related photos)to fit:Classic Fiat 500 all models up to 1972..

This Rubber Channel is measured for ONE DoorThis Channel fits where the door glass meets the Quarter Light Frame upright (see diagram in related photos)Fiat Part No: 4070123 (as per diagram in related photos)to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all mo..

Original QualityMade by CORTECO in Italyto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc & 650cc (up to 1999)(NOT for Water Cooled BIS VERSION)If you have any questions please feel free to contact us..

Original QualityMade by CORTECO in Italy Fiat Part No:  7632453 to fit:Fiat 126 704cc BIS (up to 1992)  If you have any questions please feel free to contact us..

This is the Front Hub Sealto fit:Classic Fiat 500 Giardiniera all modelsFiat 126 652cc & 704cc all models (from 1979 to 1999)Fiat 850 Saloon & Special (from 1964 to 1972)Fiat 900 T/E all models (from 1978 to 1986)If you have any questions please feel f..

OE Quality PartsMade in ItalyThis is the Front Hub Sealto fit:Classic Fiat 500 all models (from 1957 to 1974)Fiat 126 all models (from 1972 to 1978)Engine Sizes (476cc, 499cc, 594cc, 652cc)Autobianchi BianchinaIf you have any questions please feel..

Rubber Seal to fit the Front Indicator Lamp, between the Lens and Bulb Holderto fit:Classic Fiat 500 D all modelsIf you have any questions please contact us for help..

Rubber Gasket for the Front Indicator Lamp (underneath the Head Lamp)to fit:Classic Fiat 500 N/D/F/L/R/G all modelsIf you have any questions please contact us for help..