Body Parts

Bonnet Hinge Pin54mm x 6mmNumber 3 in the diagramto fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Made in ItalyThis is one complete floor panel with seat runners and x-membersto fit:Classic Fiat 500 D/F/L/RFiat 126 all models..

Brand NewGenuine Fiat PartsPrice is for ONE (1) Pin58mm x 8mmFiat Part No: 4350841to fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Made in ItalyThis shaped metal cover fits underneath the Engine to cover the flywheel and protect it from any dirt or debris from getting inSupplied with new Bolts and Washers to fitto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (NOT 126 BIS)I..

This Panel is located at the front of the car between the inner front wheel housing panels. It has the studs tomount the front Leaf Spring (see photo)to fit:Classic Fiat 500 F,L & Giardiniera all modelsFiat 126 all modelsIf you have any questions please contact us for ..

Brand NewNumber 17 in the diagramto fit:Fiat 126 all models..

This is a metal plate with welded studs to repair the Studs that hold the front wishbone linkThe distance between the two bolts center to center is 105mmto fit:Classic Fiat 500R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Converts rust to a sound surface in just 15 minutesKey FeaturesConverts rust to a sound surface in just 15 minutes Ideal for small patches of rust Repaintable after 3 hours Available in 90ml and 250ml bottles..

Kills rust, primes and undercoats all in oneKey FeaturesKills rust, primes and undercoats all in one Can be applied directly onto rust Compatible with most topcoats Suitable for large and heavily pitted areas of rust..

Hot Air Transfer Tube(If you have a 650cc engine fitted to a classic Fiat 500 then you need this Heat Tubeto join from the Thermostat Housing to the Tunnel)to fit:Classic Fiat 500 all models (with 650cc Engine fitted)Fiat 126  594cc & 650cc all modelsIf you hav..

Fits underneath the Door from front wing to back archto fit:Fiat 126 all models..

Brand NewLEFT HAND SIDEThere are no holes in this door for any mouldingsto fit:Fiat 126 all models..

This is the Front Front Filler Panel that houses the Side Repeater LampFitted behind the Bonnet and above the Front WingN/S Left Hand Sideto fit:Fiat 126 all modelsIf you need help please contact our office..

This panel is part of the chassis and is where the suspension is mounted ontoLeft Hand Sideto fit:Classic Fiat 500 R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis Bracket is welded to the Inner Front Arch and supports the suspensionto fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Made in Polandto fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Brand NewGenuine Fiat PanelsLeft Hand SideNumber 1 in the diagramto fit:Fiat 126 air cooled all modelsPLEASE CONTACT US WITH REGARDS SHIPPING AS THIS IS A VERY LARGE PANEL..

This Metal Jack Support Bracket is fitted at the side of the car underneath and is used when jacking the car up for supportLeft Hand Sideto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)If you have any questions please feel free to ask..

Fits behind the Outer Sill Panel along the bottom of the Door to fit:Fiat 126 all models..

Fits underneath the Door from front wing to back archO/S Right Hand Sideto fit:Fiat 126 all modelsIf you have any questions please contact us..