Rubbers and Grommets

To fit over the Accelerator/Throttle Pedal to add gripto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all  modelsFiat 600 all modelsIf you have any queries or questions please feel free to ask..

This is a complete kit including1x Bonnet Seal Grommet Kit (fits around the aperture of the front Bonnet Seal to make the opening and closingsmoother and keep the gaps consistent1x Rear Engine Lid Grommet Kit (two fit on either side of the engine lid onto the body so the lid closes and d..

Quality Rubber Made in ItalyThis rubber pad or grommet fits around the Bonnet and rear Engine Lid aperture to fit:Classic Fiat 500 all models..

This kit fits around the aperture of the front Bonnet Seal to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all modelsIf you have any questions or queries please feel free to ask..

This rubber cone shaped grommet fits onto the front panel and the bonnet closes down onto itIt is also used on the sunroof to stop the handle Length of Cone: 19mmDiameter of base: 19mm  to fit:Classic Fiat 500 all modelsFiat 126, Fiat 600, 1100 all ..

Genuine Fiat PartsThis is a rubber pedal shaped cover for the Brake and Clutch Pedal to add gripto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all  modelsFiat 850 Special & various modelsIf you have any queries or questions please feel free to ask..

Rubber Boot/Cover to fit over the Brake Light Switch and prevent damp & dirt getting to the connectionsto fit:Classic Fiat 500 all modelsFiat 600 all modelsIf you have any questions please contact us for help..

Rubber Seal/Gasket to fit between the Bumper Bracket and the bodyworkand prevent any marks or damageto fit:Classic Fiat 500 all modelsFiat 126Fiat 600If you have any queries or questions please feel free to ask..

This is a set of FOUR Rubber Seal/Gasket to fit between the Bumper Bracket and the bodyworkand prevent any marks or damageto fit:Classic Fiat 500 all modelsFiat 126Fiat 600If you have any queries or questions please feel free to ask..

Made in ItalyThis is a Black Plastic Plug that fits into the hole where the check strap bolt fits intoto fit:Classic Fiat 500 F/L/R all modelsIf you have any questions please contact us for help..

Made in ItalyThis is a Rubber Boot thats fits over the rear of the Ignition to protect the wiring and plugs from damp and dustto fit:Classic Fiat 500 L with column style Ignition Switch (see photo)If you have any questions please contact us for help..

This is a rubber seal that is located where the Door Hinges are to protect the interior light switch from waterThis is for ONE Sealto fit:Classic Fiat 500 all models (up to 1974)If you have any questions please feel free to ask..

This rubber pad or grommet fits around the Door aperture on the top and bottomThere are TWO per Doorto fit:Classic Fiat 500 all models..

Good Quality Seals as OriginalMade in ItalyThis is a Roll of Rubber Door Seal to fit the two doors of a classic Fiat 500This Seal has a small profile especially for the Fiat 500 Doors to allow them to shutto fit:Classic Fiat 500 F,L,R all modelsIf you have any ..

Good Quality Seals as OriginalMade in ItalyThis is a Roll of Rubber Door Seal to fit the two doors of a Fiat 126This Seal has a small profile especially for the Fiat 126 Doors to allow them to shutto fit:Fiat 126 all modelsIf you have any questions please conta..

Brand NewProduced in ItalyThis is the Rubber Seal that fits around the Door Opening on the bodyto fit:Classic Fiat 500 N all models (from 1957 on)If you have any questions please contact us for help..

Brand NewProduced in ItalyThis is the Rubber Seal that fits around the aperture of the doorto fit:Classic Fiat 500 N all models (from 1957 on)If you have any questions please contact us for help..

This rubber Boot fits onto the cable and over the Dynamo terminal to protect and insulate itThere are two options to choose SMALL or LARGEto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 594cc early models with Dynamo (up to 1976)Dimmensions:Total Length: 45m..

These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all models (NOT Giardiniera)If you have any questions or queries please feel free to ask..

Made in ItalyThis is a Rubber Plug to fill the holes on the floor either side of the tunnelThere are usually 6 holes (3 per side)to fill hole 20mm Diameterto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..