Modifications

This is an Adaptor thats retro fitted to the Front Engine Timing Cover for fitting an Oil CoolerFinished in AluminiumSupplied with fittingsto fit:Classic Fiat 500 all modelsFiat 126 All air cooled modelsIf you have any questions please contact us for help..

This is a kit including1x  Oil Pressure Sender Unit1x  Oil Pressure Light Switch2x  Copper WasherThese are used if you have a modified engine and an uprated speedo with an Oil Pressure Gauge and a Warning Lightto fit:Classic Fiat 500 all modelsFiat 126 Air Cool..

This rubber seal kit fits behind the outer door handle onto the bodywork to protect itto fit:Classic Fiat 500 all models (up to 1974)If you have any questions please feel free to ask..

This is a PAIR (2) of Front Adjustable COIL OVER Shock AbsorbersFitted with Harder Poly Bushes Top & BottomThese Shock Absorbers MUST be fitted to a car with an Independent Subframe and NOT a Leaf Spring(we also sell a complete independent suspension kit with subframe and shocks) ..

Made in ItalyThese are usually applied to the Coil Over Shock Absorbers that we sell with the Independent Suspension Kit but theycan also be used on the standard type shock absorbersThis is for TWO Uprated Hardened Polyurethane Bush for the Rear Shock AbsorberDimmensions:  Outer Diameter 40mm&n..

Beautiful Polished Chrome Gear Knob has the Abarth Scorpion BadgeFixed to the Gear Lever with Grub Screws and Supplied with all Fittingsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any ques..

Beautiful Polished Chrome Gear Knob has the Abarth Scorpion BadgeFixed to the Gear Lever with Grub Screws and Supplied with all Fittingsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any ques..

Beautiful Polished Chrome Gear Knob has the Abarth Scorpion BadgeFixed to the Gear Lever with Grub Screws and Supplied with all Fittingsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any ques..

Brand NewMade in ItalyThis badge has 4 studs to fit and is supplied with washers & nutsHas Grille holes around the Fiat Badgeto fit:Classic Fiat 500 all modelsIf you have any questions please ask a question for help..

Beautiful Polished Chrome Gear Knob has the Fiat BadgeFixed to the Gear Lever with Grub Screws and Supplied with all Fittingsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsFiat 600 all modelsFiat 850 all models ..

Brand NewMade in ItalyThis is made to fit onto a Panda 30 Carburetor WEBER DGF30 with an oval locating holeto fit:Classic Fiat 500 (with Panda 30 Head & Carburettor)Fiat 126  (with Panda 30 Head & Carburettor)If you have any questions please ask for help..

Stainless SteelKey FeaturesStainless Steel 12V 20A Max Fits hold size 19mm Sold as a singleCan be used as an engine starting switchinstead of a pull lever onClassic Fiat 500,600,126..

Brand New StockThis is set of4x Short Rigid Tube1x Long Rigid Tubeto fit:Fiat Panda 30Classic Fiat 500Fiat 126..

Brand New Old StockThis is set of4x Short Tube1x Long Tubeto fit:Fiat Panda 30..

This is a bespoke tailor made cover for the spare wheel under the bonnetMade in Good Quality MohairRacing Green (available in different colours on our website)to fit:Classic Fiat 500 all modelsIf you need any help please contact us..

Adjustable Rear Coil Over Gas Shock Absorber KitFully Adjustable (up to 70mm) Designed to complement the Front Independent Suspension Kit Supplied as a Pair (2)to fit:Classic Fiat 500 D/F/L/R/G all modelsFiat 126 all models (exc 126 Bis)If you have any..

These cars would usally have 17mm or 19mm thickness drive shafts from the factory but we offer a stronger 22mm drive shaft kit RIC-1967 to reduce the chance of breaking shaftsThis is for ONE Rear Hub Flange (4 bolt type) if you already have this kit installedDiameter 67mmDesigned to fit ..

This Bracket is bolted to where the rear handle attaches inside the rear engine lidIts spring loaded and the hook will hold onto the catch inside the top of the engine bay to keep the rearengine lid open and help to keep the engine coolto fit:Classic Fiat 500 N/D/F/L/R all model..

This is for a PAIR (2) of left & right metal catches to fit either side of the rear engine lidand hold it in a slightly open position, to allow hot air to escapeto fit:Classic Fiat 500 N/D/F/L/R all models..

These Metal Brackets are a retro fit item and fit either side of the Rear Engine Lid and hold it open to aid coolingto fit:Classic Fiat 500 D/F/L/R all models..