Reconditioned Parts

This is a complete Cylinder Head reconditioned by professionals to a very high standardWork completed includes,Skimming All threads Checked and repaired if necessary Vapour Blasting Replace the Valve Seats to take Unleaded Fuel New Valve Guides, Seals, Uprated Larger Ori..

This is a complete Cylinder Head reconditioned by professionals to a very high standardWork completed includes,Skimming All threads Checked and repaired if necessary Vapour Blasting Replace the Valve Seats to take Unleaded Fuel New Valve Guides, Seals, Uprated Larger Ori..

This is a complete Cylinder Head reconditioned by professionals to a very high standardWork completed includes,Skimming All threads Checked and repaired if necessary Vapour Blasting New Valve Guides, Seals, Original Valves & Springs fitted Re-Cutting Inlet Valve Seats L..

This is a complete Cylinder Head reconditioned by professionals to a very high standardThis head Includes Larger Uprated Inlet Valve (34mm) & Exhaust Valves (30mm)Work completed includes,Vapour Blasting Skimming All threads Checked and repaired if necessary New Valve Gu..

This is a Reconditioned Kit of TWO Stub Axles for the Left & RightThese kits have BRAND NEW UprightsRoller BearingsTop BushesKing Pin's WashersBrass Bushes Hub Nuts x2and are readyto installThis kit is also modified with bearings top and bottom for a smoother actionSupplied with two new Hub Nuts(Onc..

Brand New Starter MotorFully Guaranteed and supplied with a 12 month warrantyto fit:Classic Fiat 500 (499cc) D/F/L(fitted with a 3 bolt flange at the top of the gearbox housing)If you have any queries or questions please feel free to contact our office..

This Rubber Boot is located on the Starter Motor Lever to protect it from dirt and dampto fit:Classic Fiat 500 all modelsFiat 126 all pull-start modelsIf you have any questions please contact us for help..

This thin metal support plate is fitted between the Starter Motor and the Gearbox Bell Housingto fit:Classic Fiat 500 F/L all modelsIf you have any questions please contact us for help..

This thin metal support plate is fitted between the Starter Motor and the Gearbox Bell Housingto fit:Classic Fiat 500 R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Dimmensions: Outer Diameter 14mm, Inner Diameter 9.8mm, Length 13.5mmto fit:Classic Fiat 500N/D/F/L/R all modelsAutobianchi BianchinaFiat 1100 (103)Fiat 1200If you need any help please contact us..

Fully Reconditioned Steering Boxfor Left Hand Drive Cars onlyPLEASE NOTE: The Shaft has 18 Splines on the Shaft where it meets the Steering Shaft inside the carto fit:Classic Fiat 500 F & L all modelsPLEASE NOTE:  This is a reconditioned part so we would need your old St..