Driveshaft and Related Parts

Brand NewMade in ItalyLength [mm]426 mmWeight [g]1250 gFitting PositionRear Axle left and rightFront Axle left and rightDiameter 2 [mm]25 mmNumber of Teeth22to fit:Classic Fiat 500 D/F/L/R/G  (from 1959/60)Autobianchi Bianchina all late models (..

This is a 19mm Drive Shaft to fit:Classic Fiat 500 all models..

These parts are to fit a 22/24mm diameter Drive ShaftThis is a kit consisting of the following2x Outer Drive Shaft Boot (RIC-1591)2x Inner Drive Shaft Boot (metal bush) (RIC-380)2x Drive Shaft Spring (RIC-937)2x Drive Shaft C Clip (RIC-947)to fit:Classic Fiat 50..

Drive Shaft Clip(for 17mm Drive Shaft)to fit:Classic Fiat 500 N EARLY MODELSIf you have any questions or queries please contact our office for help..

Drive Shaft Clip(for 19mm Drive Shaft)to fit:Classic Fiat 500 N,D,F early modelsIf you have any questions or queries please contact our office for help..

Drive Shaft Clip(for 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..

This Aluminium Joint or Coupling is fitted to the Drive ShaftHas Rubber inside and Splined in the middle to mate with the Drive ShaftDimmensions:Circumference 22cmDepth 5cmDiameter 7cmto fit:Classic Fiat 500 N/DIf you have any questions please fe..

This Aluminium Joint or Coupling is fitted to the Drive ShaftHas Rubber inside and Splined in the middle to mate with the Drive ShaftDimmensions:Circumference 22cmDepth 5cmDiameter 7cmto fit:Classic Fiat 500 DIf you have any questions please feel ..

Brand NewOE QualityMade in ItalyAluminium with rubber damper inside, very common to breakDimmensions:Circumference 26cmDepth 4.5cmDiameter 8cmto fit:Classic Fiat 500 F/L/R/G (1966 to 1973)Fiat 126 all modelsFiat 600 all models..

Brand NewOE QualityMade in ItalyAluminium with rubber damper inside, very common to breakThis coupling is the original type with a recess at the top and bottom of thesplines (see photo) and is fitted with the retaining washer as part of this kitDimmensions:..

OE QualityMade in ItalyAluminium with rubber damper inside, very common to breakSupplied with4x Bolts & Spring Washers RIC-9421x Rear Hub Nut RIC-9311x Driveshaft Coupling Joint RIC-684Dimmensions:Circumference 26cmDepth 4.5cmDiameter 8cm..

Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flangeFiat Part No: 16044121to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600If you have any queries or questions please contact our office for help..

Brand New Old StockDiameter 60mmBolts centre to centre 40mmto fit 17mm diameter  Drive Shaftto fit:Classic Fiat 500N with 17mm Drive Shafts on first series modelsIf you have any questions please contact us for help..

OE Quality PartsMade in ItalyDiameter of Shaft 19mmThis kit consists of,2x Drive Shafts(19mm diameter)2x Drive Shaft Flange2x Shaft End Springs2x Clips2x Inner Boots2x Outer Bootsto fit:Classic Fiat 500 N,D,F models (up to 1968)Ther..

OE Quality PartsMade in ItalyLargest Diameter available 24/25mm (this measurement can vary between 22mm and 25mm)This kit consists of,2x Drive Shafts(24/25mm diameter)2x Drive Shaft Flange2x Shaft End Springs2x Clips2x Inner Boots2x Outer Bootst..

Brand NewThis is a new improved high quality modified Drive Shaft KitThe Metal Flanges have been modified and reinforced so they are much stronger than the original as they can be prone to breaking. These are four bolt fitting so double check the fitting of your old flanges.Largest ..

These Metal Nuts are not threaded but lock onto the end of the Drive Shaft inside the Gearbox to lock in to placeThere are TWO Nuts per Drive ShaftSold as a PAIR (2)to fit:Classic Fiat 500 all models N/D/F/L/R/GFiat 126 all modelsIf you have any questions please con..

This small Spring is located at the wheel end of each drive shaft to keep the tension and stop any knocking(for earlier thinner type 17 & 19mm Drive Shaft)to fit:Classic Fiat 500 D/F  (up to 1970)If you have any queries or questions please contact our office for h..

This small Spring is located at the wheel end of each drive shaft to keep the tension and stop any knocking(for later larger type 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R (up to 1974)Fiat 126 all modelsIf you have any queries or questions please contact our..

Quality RubberMade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Plastic Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F..