Gaskets, Grommets and Rubber Parts

This is a Gasket Kit consisting of4x  Carburettor & Spacer Gaskets (WEBER 28IMB)2x  O'Ring for Carburettor (WEBER 28IMB)3x  Fuel Pump Gasket1x  Distributor Gasketto fit:Classic Fiat 500 (with 650cc 126 Engine Fitted)Fiat 126 650cc all models (up to 1994)..

This is a rubber plug or a 19mm hole on the dashboardto fit:Classic Fiat 500Fiat 126Fiat 600Fiat 850Fiat 124Autobianchi Bianchina..

OE Quality PartsMade in ItalyThis pad supports the top of the engine mount spring (see diagram)to fit:Classic Fiat 500 R all modelsFiat 126 air cooled all models..

This Gasket fits between the Exhaust and the Manifold/ElbowYou would normally change them as a pairto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 600cc/650cc  (NOT Bis)..

This Gasket fits between the Exhaust and the Manifoldto fit:Classic Fiat 500 Giardiniera (estate) all  modelsFiat 126 Bis 704cc (Water Cooled)..

This Gasket fits between the Exhaust Manifold/Elbow and the EngineYou would normally change them as a pairto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 600cc/650cc  (NOT Bis)..

This is for ONEHeight 14mmWidth 19mmto fit:Autobianchi Bianchina all models inc Berlina,Transformabile & Cabrio..

to fit:Classic Fiat 500 all models inc D/F/L/R & Giardiniera estate (up to 1973)126 all models 650cc & 704cc Bis600 all models850 all models..

Product InformationHylomar 102 RTV Silicone in an 85g tubeKey FeaturesHylomar 102 RTV Silicone in an 85g tube Hylomar 102 is a black, neutral-curing amine-type silicone sealant Specified and used for its oil tolerance, particularly to new synthetic oils..

This is for ONEHeight 14mmWidth 21mmto fit:Autobianchi Bianchina all models inc Berlina,Transformabile & Cabrio..

This Copper Uprated Gasket fits between the Exhaust and the Manifold/ElbowThis is for TWO (2) GasketsCopper has better Heat Properties than standard Gasket material and will last longerto fit:Classic Fiat 500 D/F/L/RFiat 126 600cc/650cc  (NOT Bis)If you have..

Copper has better Heat Properties than standard Gasket material and will last longerSupplied as a set of 4 Gasket,2x Manifold Gasket RIC-21012x Exhaust Gasket RIC-5265to fit:Classic Fiat 500 D/F/L/RFiat 126 600cc/650cc  (NOT Bis)If you have any questions pleas..

This Copper Uprated Gasket fits between the Manifold/Elbow and the Cylinder HeadThis is for TWO (2) GasketsCopper has better Heat Properties than standard Gasket material and will last longerto fit:Classic Fiat 500 D/F/L/RFiat 126 600cc/650cc  (NOT Bis)If you..

This is for a PAIR (2) of Rubber INLET Valve Stem Oil Sealto fit:Classic Fiat 500 all modelsFiat 126Autobianchi Bianchina..

This is a kit of hose and drain outlets to install into the front windscreen seal and createa drain for the water to run through and escapeThe original cars from factory would have had this built into the windscreen seal but these daysthe seals do not have this provision, so you would b..